EDDHA-Fe

EDDHA-Fe 6

used as an effective solution to correcting iron deficiencies and for the maintenance of iron levels in crops grown in highly acidic or alkaline soils. It is particularly effective in highly alkaline soil conditions. It is use in all crops that respond to supplemental applications of iron and good compatibility with all agricultural inputs such as fertilizers and pesticides.

The advantages of EDDHA-Fe

• Proven field results show greater yields and larger, healthier plants.
• Lowest cost per pound of available ortho / ortho iron.
• No messy mixing of dry powders, choice of liquid or dry.
• New concentrated suspension simplifies application; improves uniformity.

Chemical Analysis

Application

Transportation Information

Storage & Handing

l            Store in a cool, ventilated warehouse.

l            Keep away from fire and heat sources.

l            Oxidants should be stored separately and avoid mixing reservoir.

l            Equipped with the appropriate variety and quantity of fire equipment.

l            Storage areas should be equipped with appropriate materials asylum leakage.

Packing

l            In 25kg pp bags;

l            Packing with pallets

l            16MT/20’FCL

Application Recommendations

• EDDHA-Fe 6 works best when crops are not under moisture stress and are supplied with adequate major nutrients.
• EDDHA-Fe 6 is most effective when applied at crop stages where demand for iron is most critical and when the crop is most responsive to iron applications.
• If this product is to be applied as a liquid either on the soil or on the foliage, it is NOT necessary to pre-mix with a small amount of water. Instead, add this product directly into the solution tank slowly and maintain good agitation. Agitation and stirring should continue until the product is fully dissolved.
• As a matter of precaution, for tank-mix applications with other agricultural inputs such as fertilizers and pesticides, it is advisable to prepare a sample mixture of these products to ensure good compatibility before application.

1. EEDHA Fe 6 can be applied around the plants as a powder, liquid spray, and liquid injection or through drip irrigation systems

• When applied as a powder, it should be washed in or irrigated with water within 4 hours of application.
• When applied as a spray onto the soil, make sure that coarse spray nozzles are used and that adequate volume of water is used to wet the soil thoroughly.
• When applied as a soil injection, it should be done at less than 1 meter apart.
•  

2. General Rates of Application
The rates recommended below represent the upper and lower limits of the range. Actual rate to be applied depends on size of the plant and the level of need as determined by the level of deficiency of iron.

3. Applications on tree crops
This product is to be applied in a wide circular band under the full canopy of the tree,regardless of the method of application.